| Producer | MAZAK |
| Year manufacture | 2007 |
| Control system | Mazatrol MATRIX NEXUS |
| Clamping area of table | 630x630 mm |
| Travel X-axis | 1050 mm |
| Travel Y-axis | 900 mm |
| Travel Z-axis | 980 mm |
| Spindle speed | 10 - 8000 /min. |
| Number of driven axes | 4 |
| Cooling through spindle | 60 bar |
| Spindle taper | ISO 40 |
| Max. load of table | 1500 kg |
| Max. dimensions of workpiece | 1050x1300 mm |
| Number of positions in magazine | 80 |
| Number of pallets | 2 |
| Max. torque of spindle | 1218 Nm |
| Rapid feed | 60 m/min. |
| Machine weight | 21000 kg |
| Control system | Mazatrol MATRIX NEXUS |
| Travel X-axis | 1050 mm |
| Travel Y-axis | 900 mm |
| Spindle speed | 10 - 8000 /min. |
| Cooling through spindle | 60 bar |
| Spindle taper | ISO 40 |
| Travel Z-axis | 980 mm |
| Clamping area of table | 630x630 mm |
| Number of driven axes | 4 |
| Max. load of table | 1500 kg |
| Max. dimensions of workpiece | 1050x1300 mm |
| Number of positions in magazine | 80 |
| Number of pallets | 2 |
| Max. torque of spindle | 1218 Nm |
| Rapid feed | 60 m/min. |
| Machine weight | 21000 kg |
| Condition | The machine is in very good technical condition, possible to test it under power |
| Dismantling | Not included |
| Loading | Not included |
| Inspections | By appoitment |
| Accesories | Workpiece and tool probe |
| Country: | Czech Republic |
| Address: | No street selected |
Vertical machining center Mikron P 500U (2018)
Vertical Machining Center MAZAK VTC 200 C II (2012...
